Saturday, May 29, 2010
at
4:39 PM
Posted by
Howard Vaux
You are a d4: You are bright, perceptive, and driven. You would be considered a blessing to mankind, if you didn't insist on using your powers for evil. You are devious, deceitful, doubtful, and downright dangerous. Assassins can learn a lot from you. If your fellow party members knew how rotten you were, they'd go over and join the bad guys. Justified or not, you are meticulous in your ways: A poison for every person, and a dagger for every back. Much of your day is spent scheming or plotting. The rest of your time is spent trying to convince others that you're simply misunderstood.
Thursday, May 27, 2010
Part Two of Model Preparation
at
11:58 PM
Posted by
Howard Vaux
Washing the model
So hmmm why Should I wash the model I just got done scraping sanding the thing? Mold release and the oils from your fingers are all over the model you have worked so hard to make look so good why cut this corner now? I know some of you might say I have never had a problem before for.
For me all it takes is one time I that I do not do this step and all my hard work looks like crap be cause the primer didn’t adherer just right.I take all my stuff to the was bin. Use warm soapy water and scrub them with with a soft bush I use a nail brush.(tooth brush is ok)
Then I rinse them off in clean running water and let them dry toughly. You can try to speed this up if you want I put them in layers of paper towels to draw off the water pat them dry but will let them sit for some time and check for any water left on them before I start painting.
Priming
What brand you use?What Brand of Primer you use isn’t as important as technique and what type of tip you use. I was taught in auto body class to start spraying off and stop spraying off of the object you are painting. Keep each pass the same distance from start to finish no mater the distance you spray from be it 1” to 1’ as long as it is the same from the start, also do not swing your arm as this will cause your arm to move in a arc and feather your edges which will cause a uneven coat of paint this will really show up on tank and any large models. Remember a few light coats is better then one heavy coat of paint.
Wednesday, May 26, 2010
Model Preparation Tips
at
1:08 AM
Posted by
Howard Vaux
I was reading over some blogs the other night and did not see a lot of stuff out there covering the basics of modeling .
This might be some real basic information to most of you.
My hope is that every one might at least learn some thing.
Here are some techniques that I have pick up form all different places and just doing it.
Mold Lines
The way I remove the lines is to scrape them at a slight angle to the mold line I do not fallow the line I am working on with the blade but rather pull it toward my self at the angle letting the contour of the model guide my direction. (picture B) If it is cylindrical like a leg I work the blade over the crest of the cylinder. I have found that fallowing the the line in a straight down will sometimes create a flat line taking down the curve. This is not always possible to do on. For longer straight flat lines you can fallow the line. I will also do this when filing down a mold line.
Seam Scraping.
Another thing I do is what I call seam scraping if I am butting two pieces together that you do not want the seam as visible. I will scrape the seam at a angle pulling crossed the seam. Then pull two pieces apart then glue them and put them back together and run the blade over it again one its set . It make a tighter fit and helps to hide the joint if it is not supposed to be seen.
This might be some real basic information to most of you.
My hope is that every one might at least learn some thing.
Here are some techniques that I have pick up form all different places and just doing it.
Mold Lines
Cleaning up mold lines I use the back of my hobby knife blade #11 blade there are two designs of blades (Picture A) I like to use the straight back (needle point) and a drop point I really like the blade with the drop point at the back of the tip it is a shorter edge to scrape with. Tighter spaces I go with the needle point blade it is nice if you have a fit in small tight places.Picture A
Pictures B
Mold Lines
The way I remove the lines is to scrape them at a slight angle to the mold line I do not fallow the line I am working on with the blade but rather pull it toward my self at the angle letting the contour of the model guide my direction. (picture B) If it is cylindrical like a leg I work the blade over the crest of the cylinder. I have found that fallowing the the line in a straight down will sometimes create a flat line taking down the curve. This is not always possible to do on. For longer straight flat lines you can fallow the line. I will also do this when filing down a mold line.
Seam Scraping.
Another thing I do is what I call seam scraping if I am butting two pieces together that you do not want the seam as visible. I will scrape the seam at a angle pulling crossed the seam. Then pull two pieces apart then glue them and put them back together and run the blade over it again one its set . It make a tighter fit and helps to hide the joint if it is not supposed to be seen.
Sunday, May 23, 2010
Incoming! From games workshop newletter
at
11:18 AM
Posted by
Howard Vaux
Throne of Skulls Grand Tournaments
"The Throne of Skulls is coming: Games Workshop's system for Grand Tournaments promising great games, friendly competition and the chance to enjoy the Games Workshop hobby: over to Jervis Johnson to tell you more.Our Throne of Skulls Grand Tournaments are all about having a great time playing one of your favorite games. Over the years they have proved to be a huge success, and so we are now planning to run more of them, in more places round the world, than ever before. As part of this process we're updating the way we run our tournaments, to make it even easier for players to have the best time possible. Our aim is simply to get people together so they can play games, meet up with their mates and immerse themselves in the hobby for a day or two.Tournaments are not just about fighting battles; there are lots of other things to do as well. They offer an unrivalled opportunity to make new friends and see some really great armies. You're sure to come away with some new ideas for your own collection, and hints and tips on how to achieve the best effects. There are usually plenty of other activities to take part in too. You'll find that a Throne of Skulls Grand Tournament is a fantastic way to celebrate all aspects of the Games Workshop hobby."
I am looking at trying to play in a few tournaments and this sound like a good way to start.
What do you think have you played in a in one of Throne of Skulls Tournaments?
If you have what do you think of them? leave a comment tell us all the good,bad and the ugly....
Thursday, May 20, 2010
Back to the bloging
at
3:07 PM
Posted by
Howard Vaux
I have been slowly plugging away at my Space Marines all the ones I have primed are now base coated I am starting on my shading and highlighting this weekend which makes me happy I can Put more time in to my army.
I have been working on a banner for a friend it is for his space wolfs.
I am currently working on that in gimp I love gimp but not as much as photo shop and soon maybe not that soon I will have my own mac to do this kinda of work on.
I also have been working on a post about model preparation cleaning mold line to sanding and priming at least my techniques from them. I should be done with it soon just taking my time to make it right...
I have been working on a banner for a friend it is for his space wolfs.
I am currently working on that in gimp I love gimp but not as much as photo shop and soon maybe not that soon I will have my own mac to do this kinda of work on.
I also have been working on a post about model preparation cleaning mold line to sanding and priming at least my techniques from them. I should be done with it soon just taking my time to make it right...
Tuesday, May 11, 2010
Crimson Fist Terminators wip
at
3:47 PM
Posted by
Howard Vaux
This is my terminator project
I have bought a few bitz for my terminators i still need a shoulder pad for my arm and a power fist for my second sergeant fro when I run them as a ten man squad. The cyclone missile launcher and assault canon will add some punch to my terminators. I want them to be removable so I am magnetizing one the other was drilled out to fit on the AoBR peg for the arm.
the hole for the arm was slightly lose so I mixed up some green stuff filed the it back in to create a nice fit.
I am almost done with this mod it a simple one but will help my versatility when making my army list
Wednesday, May 5, 2010
Tail of Four Gamers Update
at
3:02 PM
Posted by
Howard Vaux
I haven’t done much this last month i have played one game tied with DJ (W-0 L-0 T-3) that is my current record for 40K I did manage to magnetize the feet of my sergeant and his spot on the land speeder storm I am going to finish the scouts head’s tonight and them start working on there torso and legs as well there is not much left on the head’s.
the storm is coming close to being finished just finishing up with the magnets on each scout and it will ready for final detail and assembly. Then I start the Rhino i should be able get to that befor the middle of next week I will be posting the WIP pic’s soon waiting for my batteries to recharge :(
the storm is coming close to being finished just finishing up with the magnets on each scout and it will ready for final detail and assembly. Then I start the Rhino i should be able get to that befor the middle of next week I will be posting the WIP pic’s soon waiting for my batteries to recharge :(
Subscribe to:
Posts (Atom)